Distance from Rzeszow (RZE) to Dublin (DUB)
Great-circle flight distance, flight time & route type — computed from real airport coordinates.
We may earn a commission at no extra cost to you.
Affiliate disclosure: We earn a commission if you book via our links (at no extra cost to you). Search results are sorted by price, not commission. Links are marked rel="sponsored".
Quick answer: Rzeszow to Dublin distance at a glance
Flight distance from Rzeszow (RZE) to Dublin (DUB) is 1,223 miles (1,968 km, 1,063 nm) great-circle using real OpenFlights coordinates, with an estimated nonstop time of 2h 27m and route type medium-haul regional. Coordinates are 50.11°, 22.02° → 53.42°, -6.27°, bearing 292° west from haversine formula.
Facts computed from OpenFlights — not estimated. See methodology below.
The great-circle distance from Rzeszow (RZE, Poland) to Dublin (DUB, Ireland) is 1,223 miles (1,968 kilometers, 1,063 nautical miles). This is the shortest path a plane could fly between the two airports, measured along the surface of the Earth using the haversine formula on the airports' real published coordinates (50.11°, 22.02° for RZE; 53.42°, -6.27° for DUB). A nonstop flight on this route is estimated to take about 2 hours and 27 minutes, assuming a typical cruise ground speed of 500 mph including climb-out and descent. The destination lies roughly west of the origin (initial bearing 292°), placing the midpoint of this route near coordinates (51.77°, 7.87°).
By route type, this is a medium-haul regional flight. Medium-haul routes are usually nonstop on narrowbody aircraft such as the Airbus A320 or Boeing 737 — a 1.5–3 hour flight that rarely needs a connection. The destination's solar time zone is 1 hour behind the origin (see our time zone tool for the full breakdown). Estimated carbon footprint per passenger is about 110 kg CO₂ in economy, and the route difficulty score is 3/10.
Great-circle route from Rzeszow (RZE, 50.11°, 22.02°) to Dublin (DUB, 53.42°, -6.27°). The dashed line is the shortest path between the two airports on the Earth's surface — the path a nonstop flight would follow. The midpoint at (51.77°, 7.87°) gives a sense of which region the flight overflies.
How this distance is calculated
TripRoute computes the great-circle distance between two airports using the haversine formula applied to each airport's published latitude and longitude from the public OpenFlights airports.dat dataset (the same data that powers airline route maps worldwide). The haversine formula accounts for the curvature of the Earth, so the result is the true shortest distance along the surface — not a straight line on a flat map. We express it in statute miles (1,223 mi), kilometers (1,968 km, conversion factor 1.60934), and nautical miles (1,063 nm, factor 0.868976). The estimated flight time assumes a ground speed of 500 mph including the climb and descent phases, which is a reasonable average for subsonic commercial jets — actual flight time varies with winds, routing, and the specific aircraft type. The compass direction (west, bearing 292°) is the initial great-circle bearing from origin to destination; the path curves slightly because of the Earth's curvature on long sectors.
TRWhen distance matters most for RZE → DUB
At 1,223 miles this sits in the narrowbody sweet spot, which usually means frequent nonstops and competitive fares on this medium-haul regional route.
Guidance derived from the computed great-circle distance and category bands.
Rzeszow to Dublin — quick answers
How far is Rzeszow from Dublin by plane?
The nonstop flight distance from RZE (Rzeszow) to DUB (Dublin) is 1,223 miles (1,968 km, 1,063 nautical miles), measured as a great-circle line across Earth's surface using the airports' published coordinates. This haversine calculation accounts for Earth's curvature and matches airline navigation charts; actual flown distance is slightly longer due to airways and winds.
How long does it take to fly from Rzeszow to Dublin?
Estimated nonstop flight time is 2 hours and 27 minutes, assuming a typical jet cruise speed of about 500 mph including climb and descent. Gate-to-gate time is usually 20–35 minutes longer for taxi and air-traffic routing, and connecting itineraries add 1–4 hours depending on layover length and airport connection efficiency.
Is RZE to DUB a short, medium, or long-haul flight?
This is a medium-haul regional flight (1,223 miles). Medium-haul flights are usually nonstop on narrowbody aircraft like the A320 or 737 with standard economy service. Flight categories follow industry distance bands that predict aircraft type and service level, so you can anticipate cabin options and connection likelihood.