Carbon footprint calculator · Switzerland → Italy

Carbon footprint: Basel (BSL) to Catania (CTA)

Per-passenger CO₂ (economy, incl. radiative forcing) — compared with train and car alternatives.

70kg CO₂
Depart
Return
Guests

We may earn a commission at no extra cost to you.

Distance
782 mi
1,259 km · medium-haul regional

Affiliate disclosure: We earn a commission if you book via our links (at no extra cost to you). Results are sorted by price, not commission. Links are marked rel="sponsored".

Quick answer: BSL → CTA carbon at a glance

~70 kg CO₂
Flight (economy)
~28 kg CO₂
Train per passenger
Train · 28 kg
Greenest option

Flying BSL to CTA (782 mi) emits about 70 kg CO₂ per passenger in economy (incl. radiative forcing). Train is ~28 kg, 4-person carpool ~79 kg, solo car ~316 kg. The greenest option here is train at 28 kg — about 60% less than flying.

Factors: 0.09 kg/mile flight, 0.0355 train, 0.404 solo car (DEFRA/EPA).

Flying from Basel (BSL, Switzerland) to Catania (CTA, Italy) — a medium-haul regional covering 782 miles (1,259 km) — emits approximately 70 kg of CO₂ per passenger in economy class. This estimate uses the factor 0.09 kg CO₂ per passenger-mile (kilometre equivalent: 0.056 kg/km), which incorporates radiative forcing — the warming effect of non-CO₂ emissions (water vapour, nitrogen oxides, soot) released at cruise altitude. Excluding radiative forcing, the pure CO₂ alone would be roughly half this number. For context: the average US resident emits about 16 tons (16,000 kg) of CO₂ per year from all activities, so this one flight equals about 0% of an American's annual carbon budget. The route's carbon intensity is moderate per mile — see the comparison table below for alternative-mode emissions on the same route.

On the same 782-mile route, the lowest-carbon alternative is Train at ~28 kg CO₂ per passenger — about 60% less than flying. By contrast, a solo driver in a typical 22-mpg car would emit 316 kg over the same distance (about 351% more than the flight — solo driving is usually worse than flying on long routes because the car's per-vehicle emissions aren't shared across passengers). A four-person carpool drops the per-passenger footprint to 79 kg. To neutralise the climate impact of this flight, you'd need to plant about 4 tree-years (i.e. one mature tree absorbing CO₂ for 4 years, since a mature tree sequesters ~21 kg CO₂ per year according to the US EPA). That's also equivalent to about 15,909 smartphone charges on the US grid, or about 173 miles of solo driving in a typical car. The route's overall difficulty score (a separate metric combining distance and time-zone change) is 3/10.

70 kg
Flight (economy)
28 kg
Train
79 kg
Carpool (4)
316 kg
Solo car
4 yr
Tree-years to offset
173 mi
Equivalent driving
782 mi
Distance
Train
Best mode
CO₂ per passenger by mode — BSL → CTA
Trainlowest28 kg CO₂
0.0355 kg/mile · -60% vs flight
Flight70 kg CO₂
0.09 kg/mile · baseline
Carpool (4)79 kg CO₂
0.101 kg/mile · +13% vs flight
Solo car316 kg CO₂
0.404 kg/mile · +351% vs flight

Bars are scaled relative to the flight's per-passenger emissions (70 kg). All factors assume one passenger per seat for flight, one passenger for the solo car, four passengers sharing the carpool vehicle, and one passenger on a long-distance train. Air-rail comparison only valid where direct rail service exists on this corridor; actual rail distance may be longer than the great-circle flight path.

methodology

How this carbon footprint is calculated

TripRoute multiplies the great-circle distance between BSL and CTA (782 miles) by 0.09 kg CO₂ per passenger-mile to estimate the per-passenger climate impact of an economy flight. This factor is based on the UK Department for Business, Energy & Industrial Strategy (BEIS/DEFRA) greenhouse-gas conversion factors for short-haul economy air travel, scaled up to include radiative forcing — the non-CO₂ warming effects (water-vapour contrails, nitrogen oxides, soot) that approximately double the climate impact of emissions released at cruise altitude. For the train comparison we use the European long-distance rail average of 0.0355 kg CO₂ per passenger-mile (≈ 0.022 kg per passenger-km), which is lower than flying because electric trains draw from grid power that is increasingly decarbonised. The car factors come from the US EPA's typical light-duty vehicle emissions of about 8.89 kg CO₂ per gallon of gasoline, divided by a real-world average of 22 miles per gallon → 0.404 kg CO₂ per mile per vehicle; a four-person carpool divides this by four. Tree-offset and equivalent-driving conversions use the US EPA estimate that one mature tree sequesters about 21 kg of CO₂ per year. All factors are publicly published industry-standard numbers — no fabricated data.

TRIs offsetting BSL → CTA worth it?

At 70 kg of CO₂ per passenger this is a moderate-impact flight; one high-quality offset corresponds to roughly 4 tree-years. Taking a direct flight matters more than offset brand — a connection can roughly double emissions.

Figures computed with UK DEFRA + US EPA emission factors for 782 mi great-circle.

faq

Basel to Catania — quick answers

What is the carbon footprint of flying from Basel to Catania?

Flying BSL (Basel) to CTA (Catania) — 782 miles (1,259 km) — emits about 70 kg of CO₂ per passenger in economy class. This includes radiative forcing from non-CO₂ emissions at altitude, which roughly doubles the climate impact compared to the CO₂ alone.

Is it greener to take the train or drive from Basel to Catania?

On this 782-mile route: train ≈ 28 kg CO₂ per passenger, 4-person carpool ≈ 79 kg, flight ≈ 70 kg, and solo car ≈ 316 kg per passenger. The lowest-CO₂ option is train at 28 kg, roughly 60% less than flying.

Methodology: UK DEFRA + US EPA published factors·Distance: 782 mi (great-circle)
View deal
No booking fees

Affiliate link to Kayak — we may earn a commission at no extra cost to you.